By Lisa Gutierrez on 02/04/2015 
A Good Yarn is a sweet fiber arts store in Sarasota, Florida. Last year, they launched an easy-to-use online shop, where you can browse all of their products, from yarns to notions, kits, and my favorite…exclusive colorways!
When I was contacted to review one of the exclusive colorways, I was pretty thrilled. I chose the “Butterfly” colorway, which is one from their Purl Diver Collection. It is inspired by a beautiful photo of a Pyramid Butterfly Fish that was taken in the Soloman Islands. The gold, grays, and black were striking and caught my eye immediately.
The base yarn is Lorna’s Laces Sportmate. A very squishy sport-weight yarn made of 70% merino and 30% viscose.
Unfortunately, I received this right before that extremely busy time of year that holds holidays, sickness, and more holidays, so it stayed untouched for a while. After most of that excitement of November and December died down, I wound the skein into a ball and went on a Ravelry hunt for the perfect pattern.
I wanted a pattern that would showcase color above all else. I loved the way all the colors looked together! I found the Downtown Cowl and cast on December 30. [US 6 29″ circular needle]
I needed a project for to knit while I sat in a waiting room at the hospital. December 31, my mom had to have a stent placed in her carotid artery, so I anxiously knit the time away. I needed something to keep my mind off what was going on behind closed doors; something to control when I felt so out of control. This was perfect.
Obviously, it knit up beautifully! The colors all mixed into each other in the best possible ways. The length is perfect for wrapping twice around my neck, or three times if it’s a particularly chilly day. The yarn was dyed spectacularly, too. There was hardly any runoff when I rinsed it before blocking. By the way, how in the world do YOU block circle scarves? This one was hard! Thank goodness lace is so forgiving.
The color perfectly coordinates with my gray coat. The golds and white really pop against the black/gray. Check out A Good Yarn and give these beautiful colorways a try!
Pin It
By Lisa Gutierrez on 01/27/2015 
I mentioned on Instagram, a few weeks ago, that my uncle passed away. I made this blanket for my aunt. My uncle’s sister, who made the long road trip in from Mexico, started the border for me when I told her I didn’t know what to do. The blanket is a 40-round granny square, so I made a simple single crochet border that she worked over. Essentially, she crocheted into my last granny square round.
What resulted were these beautiful olas, or waves. I loved it and my aunt thought it was pretty, so when we ran out of yarn, I promised to finish it. I thought I would share the instructions, since I had never seen a border like this. It resembles a scallop, but they lean to the side, so it’s more wavy.
I made a video, which I’ve embedded below, but I want to put out the written instructions first.
US terminology is used throughout.
You should know: chain (CH), single crochet (SC), and treble/triple crochet (TR). This is the pattern for working around a granny square. You should have an uneven number of rounds, so there is an even number of chain spaces (ch-sp) between the corner spaces.
Attach your yarn in a corner and chain 1.
[SC in same space, Ch 2, 5 TR in same space. *Skip next cluster of stitches and space, SC in center of next cluster, SC in next stitch, SC in next space, 5 TR in same space; Repeat from * to last ch-space of this side of the square, skip last cluster of stitches and SC in corner space, Ch 2] Repeat between [ ] for 4 sides, slst into first SC. Fasten off and weave in ends.
To work this as an edge for other blanket patterns, start with a round of single crochet. There should be a multiple of 8 plus 3 between each corner space (I suggest working a [sc, ch 2, sc] into each corner).
Attach the yarn in the corner space (the chain 2), then work the first wave: ch 1, SC in same space, Ch 2, 5 TR in same space. [Skip 5 stitches, SC in each of next two stitches, work a wave in the next stitch: SC, Ch 2, 5 TR in same space.] Repeat between [ ] to the corner. Skip last 3 stitches and SC into corner, ch 3, SC in same space. Work the next edge the same way. Start with a wave in the corner, then skip 5 stitches, work 2 SC, and a wave…continue until you have worked all the way around the blanket. Slip stitch into the first SC.
Affiliate links help keep my blog running. If you are interested in any of the supplies used in this video, follow the links below:
Lion Brand Heartland yarn in “Glacier Blue”- http://amzn.to/1EpcgQc (You would need 6 skeins for a 40 round blanket and border)
Lion Brand Heartland yarn in “Redwood”- http://amzn.to/18r3iF2
Knitter’s Pride crochet hooks- http://amzn.to/1yLQi6I
There ya go. What do you think of videos? I get requests for videos, especially for the Mary Jane slipper tutorial, but they are tough to make! At least for me. I suppose it’s a learning curve and if I made more, things would feel more natural. I’m also getting over a cold, so I feel like I sound…weird. Anyway. Do they help? How’s the quality?
Pin It
By Lisa Gutierrez on 12/10/2014 
Christmas crafts are my jam! I adore handmade ornaments and now that my kids are old enough, I can force them help them to make their own. I thought I would share some of the ones we’ve made, this year. Some were already made during our last few scout meetings (oh, Tigers!) and others, I’m taking with me to our scout Christmas party, so the evening isn’t just a bunch of kids with sugar rushes running around the community center.
1. The top left corner is my FAVORITE. Winter Hat ornaments made with leftover yarn and a toilet paper roll.
2. Cookie cutter jingle bells are a kid favorite. Just use pipe cleaners to secure bells to a Christmas cookie cutter. I found these Wilton ones at Tuesday Morning for 29 cents! Score! If you don’t have a Tuesday morning, this 18-piece set looks good.
3. The foam ornament in the right hand corner is a kit from Hobby Lobby. It’s actually a photo ornament, so there goes one of our Tiger electives.
4. The beaded candy cane is an idea from a kit I saw. Just alternate red and white tri-beads on a pipe cleaner, then shape it into a candy cane.
5. The popsicle stick Rudolph is pretty self-explanatory. My MIL had one my husband made when he was little, so I just copied hers. Three popsicle sticks glued together, wiggly eyes put in place, and a red pom-pom nose, with a jingle bell tied to the center by a piece of yarn.
6. The popsicle stick Christmas tree was fun to shop for. Make a triangle with popsicle sticks, then let the kiddos color it green with markers. We glued sequins, buttons, and other “ornaments” on to decorate it. The photo was a quick print on my home printer on regular printer paper. Twine at the top to hang it.
7. Last, but not least, the baby wooden clothespin Rudolph. These wooden clothespins were actually given to me by my MIL. They were leftover from when she did this craft with her kids! So, early 90s? Anyway, it’s 2 clothespins inverted and glued to each other. Mini pom pom nose, ribbon bow tie, and sharpie eyes. Simple, but cute.
I actually put together little ornament kits for my scouts because I am slightly neurotic when it comes to messes. I KNOW they’d help me clean and I should trust them more with supplies, but let’s be real–things are gonna get crazy. SO, each kid gets all the supplies they need and they can make them at the party, or take them home to work on. It was actually quite pleasing to lay out all the supplies and then make little baggies of craft stuff.
What are you crafting for Christmas? How is your Christmas knitting going?! I have made a ton of those bulky zig-zag cowls and oh boy, I am loving that pattern still.
Pin It
By Lisa Gutierrez on 12/01/2014 
I keep mentioning that I’ve knit a whole bunch of cowls over the past few weeks. It all started with the #bulkyhatkal and my brand new set of interchangeable needles.
I received the Knitter’s Pride Trendz Chunky Set to work the KAL and they have been the best addition to the set of interchangeable needles I bought from Knit Picks, a few weeks ago. Those only go to size US 11, so I needed bigger sizes to work with bulkier weights of yarn.
I used the US 17 needles for my hat and then switched to the US 15 (seen above) for my cowls. The needles are fantastic! I’m new to interchangeables, so I don’t know how the cords compare, but I can’t imagine them working any better. They have the perfect amount of flexibility and the needle part is a great length–not too long or short. My hands didn’t get that sore feeling that usually accompanies bulky knitting.
I picked up a few different colors of super bulky yarn at Michael’s and just took off! One of the very first patterns I tried was the Swirling Cowl by Signe Marie Ricter. That pattern is for even bulkier yarn than I’ve got, so I increased my CO to 50 and started. When I got about 5 rounds in, however, I decided I wanted to make the swirl go the other way, so I changed things up a bit. Working alternating repeats of left and right leaning stitch patterns, I ended up with a really cool zig-zag cowl!
I wrote up an explanation of my modifications, so you can make one for yourself! If you’d like the original swirly cowl, check out the link I posted above! It is really pretty. Make both?!
Knit with Loops & Thread Cozy Wool
Yarn: One skein of super bulky yarn: Lion Brand Wool-Ease Thick & Quick (6 oz/170 g equals 106 yd/ 97m) OR Loops & Threads Cozy Wool (4.5 oz/127 g equals 90 yd/82 m)
Needle: 10 mm (US 15) 16-24″ circular needle
Right-leaning stitch pattern
*YO, K2tog; rep from * around.
Left-leaning stitch pattern
*SSK, YO; rep from * around.
CO 50, place marker and join to work in the round.
Start right-leaning stitch pattern and work for 5 rounds.
Switch to left-leaning stitch pattern, as follows: remove stitch marker (left photo), place first stitch on to right-hand needle without twisting, replace marker (right photo).
Start left-leaning stitch pattern and work for 5 rounds.
Switch back to right-leaning stitch pattern, as follows: do NOT make last YO, instead slip the stitch marker to the right hand needle (left photo), YO, and knit the first stitch (right photo). Resume right-leaning stitch pattern.
Continue switching between right and left-leaning stitch patterns to desired height. I worked 3 repeats each, then finished with another section of the right-leaning stitch pattern.
Bind off loosely, weave in ends.
Cowl knit with LB Wool-Ease Thick & Quick
Ta-da! I think it takes me about 2 hours, or a movie, or 3 episodes of my favorite TV show, to work one cowl. That’s pretty sweet instant gratification, don’t you think? I want to make one with a 100 stitch cast-on and a few less pattern repeats, to loop around my neck a couple times. You only need to remember to CO an even number and the pattern should work out. Perhaps you want to make some boot cuffs? Try casting on about 24 stitches. The good thing is if you have to frog a project to adjust the size, you aren’t working on an incredible number of stitches, so it won’t hurt too much.
Disclaimer: I was sent a set of Trendz Chunky Interchangeable Needles for review. All opinions are my own. No monetary compensation was given, but the link above is an affiliate link from Amazon.
Pin It
By Lisa Gutierrez on 11/25/2014 
The good folks over at Blue Sky Alpacas are hosting a really lovely Bulky Hat knit-a-long, right now, in their Ravelry Group. Through December 15, you can get a coupon for $5 off their Bulky Knit Hats for Kids & Adults book by Sarah Smuland. For every completed hat you post, you are entered to win a cool prize that includes a knitting kit AND needles from Knitter’s Pride. Pretty sweet, hmm?
I was sent enough yarn to knit the amazing “Trapper Hat” from the book. I LOVED the ear flaps and was intrigued by the fluffy bits under them and on the brim. I chose the colorway Atlantis because my kids both love blue and it’s totally grown on me. I’ll take a blue of every yarn ever, thankyouverymuch.
It took me about 3 hours to knit this baby up. You start with the ear flaps and brim, then they get joined and you work the rest of it. It was a super simple pattern to follow and I was almost ready to call it a day right there. BUT THEN…I remembered the fluff. I really wanted to see how much cuter this hat could get.
The answer was “pretty damn cute.” It took me about as much time to attach 300+ pieces of fringe as it did to knit. I thought it would be a tedious process that would bore me to tears, but I was SO wrong! I found my groove while working and with each piece that was attached, I got more and more excited.
I let out an actual squeal when it was done. I sewed up the front brim and plopped it on my head. SO DAMN CUTE. My son walked in a few seconds later, I suppose to see what the ruckus was, and I pretty much threw it on his head and squealed again. What could make this cute hat cuter? This dude’s cheeks.
I knit the largest size, so it is definitely too big for his head. It even fits me a bit over-sized, but I think it works well with this style of hat. I let him ride his scooter with it and giggled pretty much the entire time.
We hate our sidewalks. Look at that face! Sigh.
Check out the KAL and maybe join us? These quick knits would be great Christmas presents!! This is the project that put me on an extreme bulky knits kick. Did I mention I’ve knit like five cowls in the past 2-3 weeks? I knit TWO more, today. It’s just SO nice to start a project and finish it the same day. Bulky yarn for the win!
Disclaimer: I was sent yarn and needles to complete this project. All opinions in this post are most definitely my own.
Pin It
|
Disclosure You may find affiliate links and banners throughout my blog. I earn a small commission from purchases made through these links. It helps pay for keeping this blog running! All reviews and products are items I have personally used and loved. |
