Mary Jane Slippers

**I thought this was obvious, but apparently not: PLEASE OH PLEEASE do not use any of my photos without my permission! I’m a nice person, so if YOU ask nicely, I’d make a consideration. Also, don’t post this pattern anywhere else. A simple link to this page would be a great way to share it. You CAN sell slippers you make, of course, but for pete’s sake, take photos of what you made to show your customer/s! Keep those hooks going!**

PRINTER-FRIENDLY version link at bottom!

flower garden slippers [4]

20

I’ve received many messages via Ravelry about these slippers. It’s more of a tutorial than a pattern. It’s very easy to adjust to your size, but if you still have questions, please feel free to email me! lisa@goodknits.com.

Crocheted Mary Jane Slippers
(women’s large–9.5-10)

Materials:

materials

  • worsted weight yarn
  • H-hook
  • 2 buttons
  • tapestry needle
  • you’ll also need some yarn in a contrasting color. I forgot to put that in my photo.

    First, start with 8 DC into a circle. This is how I like to do that:
    01

    see the little tail on bottom? you pull that and it cinches the circle closed, as such:
    02
    after cinching, slst into the top of the first DC, ch 2.

    [See THIS POST, if you need more information about the beginning round.]

    Round 2: 2 DC into each stitch, slst into top of the first DC, ch 2. (16DC)
    Round 3: 1 DC into same place, 2 DC into next st, *1 DC into next st, 2 DC into next* to the end, slst into top of the first DC, ch 2. (24DC)
    Round 4: 1 DC into st and into the next, 2 DC into next st, *1 DC into each of the next 2, 2 DC into the next* to the end of the round, slst into top of the first DC, ch 2. (32DC).

    This is what my piece looked like after round 4:
    03

    Work 2 rounds even (NO INCREASING). By this time, the little “cup” should fit over your toes, like so:
    04
    Now, we’re going to be working back and forth in ROWS. DC into the first 23 stitches, leaving 9 unworked. Ch 2, turn. It will look like this:
    05
    Keep working back and forth over these 23 stitches for 12 rows.

    This is my half-way mark:

    06

    On row 13, DC into first 10 stitches, then DC 3 tog:
    07
    DC to the end, then seam up the heel by putting the right sides together and slip-stitching from the top down to the bottom of the heel:
    08
    I like to grab the back-loop of the half that’s closest to me and the front loop of the other half:
    09

    now, you should have a basic slipper. it will fit kind loose around the sides:
    10
    11

    the following instructions for finishing up the slipper are probably what most people get stuck on. I really hope the photos help.

    Here goes!

    join your yarn at the center back of the slipper, above the heel.
    sc into that same spot, it should be into one half of the side of a DC.
    you’re going to be working down the side of the DC that make the foot of the slipper. work 23 sc down the side, or 2 sc into the side of each row, until you get to a corner:

    12
    13

    At the corner, sc3tog (half of the last side DC, and the first 2 DC on the top.
    SC into next 5 DC.
    sc3tog (last 2 DC on toe top, and half of the first DC up the next side:

    14
    15

    SC 24 times up the side toward the heel.

    you should have space for one last SC, so SC that space together with the first sc.

    (working on the second round of single-crochet): SC2tog
    SC into next 22
    SC3tog at the corner
    SC into next 3
    SC3tog at next corner
    SC into next 22
    SC2tog
    slst into next, fasten-off.
    your slipper should fit a little more snug:

    16
    17

    If you had any problems with the previous directions, just improvise. You’re basically just making the edge more snug. I liked to decrease at the heel and at the top two corners near the toe.

    Now, join your CC yarn at the center back.

    SC into same spot.
    SC 31 sts (to where you want your loop closure).
    On SC #32, bring up a loop approx. 2″ long:
    18

    sc as usual (just w/ a big loop!) then sc to the end. slst to first, and fasten-off.

    sew a button across from the loop and you’re done!

    19

    you could also re-inforce the loop by joining your yarn at the loop-sc and SC all the way around it.

    20

    brown mary jane slippers




    Download the
    [PRINTER-FRIENDLY VERSION]
    (right-click, Save As…)
    It includes no photos and some instructions/tips on adjusting the size and a different starting method. I still suggest viewing the photos if you have any trouble with the steps, because things can get a little tricky and are hard to explain at some points.

    This pattern is available for free. If you would like to contribute anything toward the cost of maintaining this blog, please feel free to use the donate button below. Every little bit counts. Thank you so much! Enjoy!





    640 comments to Mary Jane Slippers

    Leave a Reply

    You can use these HTML tags

    <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

      

      

      

    This site uses Akismet to reduce spam. Learn how your comment data is processed.